[Resolved] php 5.3.3 with curl not working

[sicute]

hi ..
i try recomplier php become 5.3.3 and curl , i using compile php in admin section here my config :

'./configure' '--prefix=/usr/local/lsws/lsphp5' '--with-mysqli' '--with-zlib' '--with-gd' '--enable-shmop' '--enable-track-vars' '--enable-sockets' '--enable-sysvsem' '--enable-sysvshm' '--enable-magic-quotes' '--enable-mbstring' '--with-iconv' '--enable-curl' '--enable-suhosin' '--with-litespeed'

i check curl not active also i have error notice
Warning: phpinfo() [function.phpinfo]: It is not safe to rely on the system's timezone settings. You are *required* to use the date.timezone setting or the date_default_timezone_set() function. In case you used any of those methods and you are still getting this warning, you most likely misspelled the timezone identifier. We selected 'America/Los_Angeles' for 'PDT/-7.0/DST' instead in /usr/local/lsws/DEFAULT/html/phpinfo.php on line

[NiteWave]

the warning is irrelative to curl. add
date.timezone="America/Los_Angeles" etc will eliminate the warning message.

there should be no problem for 5.3.3 with curl -- I just built it a few days ago.

please record the error message during php build.

[sicute]

here some log complie

Thank you for using PHP.

Notice: Following unknown configure options were used:

--enable-track-vars
--enable-curl
--enable-openssl
--with-curl-dir=..
--enable-suhosin

Check './configure --help' for available options


Libraries have been installed in:
/usr/local/lsws/phpbuild/php-5.3.3/suhosin-0.9.32.1/modules

If you ever happen to want to link against installed libraries
in a given directory, LIBDIR, you must either use libtool, and
specify the full pathname of the library, or use the `-LLIBDIR'
flag during linking and do at least one of the following:
- add LIBDIR to the `LD_LIBRARY_PATH' environment variable
during execution
- add LIBDIR to the `LD_RUN_PATH' environment variable
during linking
- use the `-Wl,--rpath -Wl,LIBDIR' linker flag
- have your system administrator add LIBDIR to `/etc/ld.so.conf'

See any operating system documentation about shared libraries for
more information, such as the ld(1) and ld.so(8) manual pages.
----------------------------------------------------------------------

Build complete.
Don't forget to run 'make test'.

Installing Suhosin extension
Installing shared extensions: /usr/local/lsws/lsphp5/lib/php/extensions/no-debug-non-zts-20090626/
chown -R lsadm:lsadm /usr/local/lsws/phpbuild/php-5.3.3/suhosin-0.9.32.1

==============================================
Suhosin extension build complete
==============================================
Wed Oct 6 20:04:55 PDT 2010

**COMPLETE**


i check in my script php

Checking environment...

* PHP version: 5.3.3
* cURL version: not available

Environment check failed


you can check direct my phpinfo in pojokdomain dot us/phpinfo.php

i using ubuntu 10 update online fresh

I try downgrade php bellow php 5.3.3 , not working same proble with autoconf 2.6

Changing to build directory /usr/local/lsws/phpbuild/php-5.2.13
Forcing buildconf
buildconf: checking installation...
buildconf: autoconf version 2.65 (ok)
buildconf: Your version of autoconf likely contains buggy cache code.
Running vcsclean for you.
To avoid this, install autoconf-2.13.
Can't figure out your VCS, not cleaning.
rebuilding configure
ext/pdo_dblib/config.m4:55: warning: AC_CACHE_VAL(pdo_inc_path, ...): suspicious cache-id, must contain _cv_ to be cached
../../lib/autoconf/general.m4:1998: AC_CACHE_VAL is expanded from...
../../lib/autoconf/general.m4:2019: AC_CACHE_CHECK is expanded from...
aclocal.m4:2738: PHP_CHECK_PDO_INCLUDES is expanded from...
ext/pdo_firebird/config.m4:43: warning: AC_CACHE_VAL(pdo_inc_path, ...): suspicious cache-id, must contain _cv_ to be cached
ext/pdo_mysql/config.m4:135: warning: AC_CACHE_VAL(pdo_inc_path, ...): suspicious cache-id, must contain _cv_ to be cached
ext/pdo_oci/config.m4:231: warning: AC_CACHE_VAL(pdo_inc_path, ...): suspicious cache-id, must contain _cv_ to be cached
ext/pdo_odbc/config.m4:42: warning: AC_CACHE_VAL(pdo_inc_path, ...): suspicious cache-id, must contain _cv_ to be cached
ext/pdo_pgsql/config.m4:108: warning: AC_CACHE_VAL(pdo_inc_path, ...): suspicious cache-id, must contain _cv_ to be cached
ext/pdo_sqlite/config.m4:14: warning: AC_CACHE_VAL(pdo_inc_path, ...): suspicious cache-id, must contain _cv_ to be cached
ext/sqlite/config.m4:50: warning: AC_CACHE_VAL(pdo_inc_path, ...): suspicious cache-id, must contain _cv_ to be cached
rebuilding main/php_config.h.in
autoheader: WARNING: Using auxiliary files such as `acconfig.h', `config.h.bot'
autoheader: WARNING: and `config.h.top', to define templates for `config.h.in'
autoheader: WARNING: is deprecated and discouraged.
autoheader:
autoheader: WARNING: Using the third argument of `AC_DEFINE' and
autoheader: WARNING: `AC_DEFINE_UNQUOTED' allows one to define a template without
autoheader: WARNING: `acconfig.h':
autoheader:
autoheader: WARNING: AC_DEFINE([NEED_FUNC_MAIN], 1,
autoheader: [Define if a function `main' is needed.])
autoheader:
autoheader: WARNING: More sophisticated templates can also be produced, see the
autoheader: WARNING: documentation.
ext/pdo_dblib/config.m4:55: warning: AC_CACHE_VAL(pdo_inc_path, ...): suspicious cache-id, must contain _cv_ to be cached
../../lib/autoconf/general.m4:1998: AC_CACHE_VAL is expanded from...
../../lib/autoconf/general.m4:2019: AC_CACHE_CHECK is expanded from...
aclocal.m4:2738: PHP_CHECK_PDO_INCLUDES is expanded from...
ext/pdo_firebird/config.m4:43: warning: AC_CACHE_VAL(pdo_inc_path, ...): suspicious cache-id, must contain _cv_ to be cached
ext/pdo_mysql/config.m4:135: warning: AC_CACHE_VAL(pdo_inc_path, ...): suspicious cache-id, must contain _cv_ to be cached
ext/pdo_oci/config.m4:231: warning: AC_CACHE_VAL(pdo_inc_path, ...): suspicious cache-id, must contain _cv_ to be cached
ext/pdo_odbc/config.m4:42: warning: AC_CACHE_VAL(pdo_inc_path, ...): suspicious cache-id, must contain _cv_ to be cached
ext/pdo_pgsql/config.m4:108: warning: AC_CACHE_VAL(pdo_inc_path, ...): suspicious cache-id, must contain _cv_ to be cached
ext/pdo_sqlite/config.m4:14: warning: AC_CACHE_VAL(pdo_inc_path, ...): suspicious cache-id, must contain _cv_ to be cached
ext/sqlite/config.m4:50: warning: AC_CACHE_VAL(pdo_inc_path, ...): suspicious cache-id, must contain _cv_ to be cached
Configuring PHP build (2-3 minutes)
./configure '--prefix=/usr/local/lsws/lsphp5' '--with-mysqli' '--with-zlib' '--with-gd' '--enable-shmop' '--enable-track-vars' '--enable-sockets' '--enable-sysvsem' '--enable-sysvshm' '--enable-magic-quotes' '--enable-mbstring' '--with-iconv' '--enable-curl' '--enable-openssl' '--enable-suhosin' '--with-litespeed'
cat: confdefs.h: No such file or directory
./configure: 465: ac_fn_c_try_run: not found
./configure: 465: 5: Bad file descriptor
./configure: 465: :: checking for pthreads_cflags: not found
./configure: 465: 6: Bad file descriptor
./configure: 12050: checking for dirent.h that defines DIR... : not found
eval: 1: Bad substitution
**ERROR** Could not configure PHP build

[NiteWave]

yes, the error message tell the cause:

Notice: Following unknown configure options were used:
--enable-curl
--with-curl-dir=..

checked the PHP document,
http://www.php.net/manual/en/curl.installation.php

no --enable-curl option, instead, it's --with-curl

[sicute]

same curl not active event using --enable-curl or --with-curl-dir=/usr/lib/libcurl.a
may be i try manualy complie without using litespeed compiler.

[NiteWave]

to be clear, must include

--with-curl

and not use

--enable-curl
--with-curl-dir

there are just Unknown options.

[sicute]

thanks now is working after 2 day

her my config

/configure' '--prefix=/usr/local/lsws/lsphp5' '--with-mysqli' '--with-zlib' '--with-gd' '--enable-shmop' '--enable-track-vars' '--enable-sockets' '--enable-sysvsem' '--enable-sysvshm' '--enable-magic-quotes' '--enable-mbstring' '--with-iconv' '--enable-curl' '--with-curl' '--enable-suhosin' '--with-litespeed'

[agriz]

I reintalled again.
I think curl is missing. I am re-compiling php again with curl.

But in the meantime, the site takes very very long time to load.
Finally sometimes shows output without css and sometimes with proper design.

I am loading the site as site.com:2080

(Wrong post)
http://www.litespeedtech.com/support...streply&t=5637

[webizen]

Originally Posted by agriz

...
But in the meantime, the site takes very very long time to load.
Finally sometimes shows output without css and sometimes with proper design.

I am loading the site as site.com:2080

...

You may have path/to/css hardcode in the page so that those css files will be missing when serve from :2080.

to troubleshoot long page loading, use firebug to get the loading breakdown of each resource of the page to see the bottleneck.