phpize compiling xcache, eaccelerator, APC etc

eva2000

eva2000

Well-Known Member
#1
#1
Since I'm running litespeed 2 cpu license on a test server with php suexec disabled, I want to compare all 3 opcode caches. Just curious am I correct in assuming for litespeed, nginx and apache I'd use their respective phpize locations ?
  • litespeed lsapi = /usr/local/lsws/lsphp5/bin/phpize
  • nginx php-fpm = /nginxphp/bin/phpize
  • apache mod_php = /usr/bin/phpize

i.e.

Code: 
/usr/local/lsws/lsphp5/bin/phpize
./configure --enable-xcache --with-php-config=/usr/local/lsws/lsphp5/bin/php-config

/nginxphp/bin/phpize
./configure --enable-xcache --with-php-config=/nginxphp/bin/php-config

/usr/bin/phpize
./configure --enable-xcache --with-php-config=/usr/bin/php-config
for apache
Code: 
/etc/php.ini
zend_extension = /usr/lib64/20090626/xcache.so
for nginx
Code: 
/nginxphp/etc/php.ini
zend_extension = /nginxphp/lib/php/20090626/xcache.so
for litespeed just going to build xcache from litespeed admin console
or
Code: 
/usr/local/lsws/lsphp5/etc/php.ini
/usr/local/lsws/lsphp5/lib/php/20090626/xcache.so
Code: 
locate phpize

/nginxphp/bin/phpize
/nginxphp/lib/php/build/phpize.m4
/nginxphp/man/man1/phpize.1
/usr/bin/phpize
/usr/lib64/build/phpize.m4
/usr/local/lsws/lsphp5/bin/phpize
/usr/local/lsws/lsphp5/lib/php/build/phpize.m4
/usr/local/lsws/lsphp5/man/man1/phpize.1
/usr/local/lsws/phpbuild/php-5.3.4/scripts/phpize
/usr/local/lsws/phpbuild/php-5.3.4/scripts/phpize.in
/usr/local/lsws/phpbuild/php-5.3.4/scripts/phpize.m4
/usr/local/lsws/phpbuild/php-5.3.4/scripts/man1/phpize.1
/usr/local/lsws/phpbuild/php-5.3.4/scripts/man1/phpize.1.in
/usr/local/lsws/phpbuild/php-5.3.5/scripts/phpize
/usr/local/lsws/phpbuild/php-5.3.5/scripts/phpize.in
/usr/local/lsws/phpbuild/php-5.3.5/scripts/phpize.m4
/usr/local/lsws/phpbuild/php-5.3.5/scripts/man1/phpize.1
/usr/local/lsws/phpbuild/php-5.3.5/scripts/man1/phpize.1.in
/usr/local/src/nginxphp/php-5.3.5/scripts/phpize
/usr/local/src/nginxphp/php-5.3.5/scripts/phpize.in
/usr/local/src/nginxphp/php-5.3.5/scripts/phpize.m4
/usr/local/src/nginxphp/php-5.3.5/scripts/man1/phpize.1
/usr/local/src/nginxphp/php-5.3.5/scripts/man1/phpize.1.in
/usr/local/src/php535/php-5.3.5/scripts/phpize
/usr/local/src/php535/php-5.3.5/scripts/phpize.in
/usr/local/src/php535/php-5.3.5/scripts/phpize.m4
/usr/local/src/php535/php-5.3.5/scripts/man1/phpize.1
/usr/local/src/php535/php-5.3.5/scripts/man1/phpize.1.in
/usr/share/man/man1/phpize.1
/usr/share/man/man1/phpize.1.gz
Code: 
locate php-config
/nginxphp/bin/php-config
/nginxphp/man/man1/php-config.1
/usr/bin/php-config
/usr/local/lsws/lsphp5/bin/php-config
/usr/local/lsws/lsphp5/man/man1/php-config.1
/usr/local/lsws/phpbuild/php-5.3.4/scripts/php-config
/usr/local/lsws/phpbuild/php-5.3.4/scripts/php-config.in
/usr/local/lsws/phpbuild/php-5.3.4/scripts/man1/php-config.1
/usr/local/lsws/phpbuild/php-5.3.4/scripts/man1/php-config.1.in
/usr/local/lsws/phpbuild/php-5.3.5/scripts/php-config
/usr/local/lsws/phpbuild/php-5.3.5/scripts/php-config.in
/usr/local/lsws/phpbuild/php-5.3.5/scripts/man1/php-config.1
/usr/local/lsws/phpbuild/php-5.3.5/scripts/man1/php-config.1.in
/usr/local/src/nginxphp/php-5.3.5/scripts/php-config
/usr/local/src/nginxphp/php-5.3.5/scripts/php-config.in
/usr/local/src/nginxphp/php-5.3.5/scripts/man1/php-config.1
/usr/local/src/nginxphp/php-5.3.5/scripts/man1/php-config.1.in
/usr/local/src/php535/php-5.3.5/scripts/php-config
/usr/local/src/php535/php-5.3.5/scripts/php-config.in
/usr/local/src/php535/php-5.3.5/scripts/man1/php-config.1
/usr/local/src/php535/php-5.3.5/scripts/man1/php-config.1.in
/usr/share/man/man1/php-config.1
 
Last edited:
eva2000

eva2000

Well-Known Member
#3
#3
Decided to try it anyway and followed the outline steps in 1st post above, and installed xcache 1.3.1 on all three for litespeed, nginx and apache using same xcache configuration below just with different paths to xcache.so

for litespeed

Code: 
[xcache-common]
zend_extension = /usr/local/lsws/lsphp5/lib/php/20090626/xcache.so

[xcache.admin]
xcache.admin.enable_auth = On
xcache.admin.user = ""
xcache.admin.pass = ""

[xcache]
xcache.shm_scheme =        "mmap"
xcache.size  =               48M
xcache.count =                2
xcache.slots =                8K
xcache.ttl   =                3600
xcache.gc_interval =          7200

xcache.var_size  =            4M
xcache.var_count =             1
xcache.var_slots =            8K
xcache.var_ttl   =             0
xcache.var_maxttl   =          0
xcache.var_gc_interval =     300

xcache.test =                Off
; N/A for /dev/zero
xcache.readonly_protection = Off
; for *nix, xcache.mmap_path is a file path, not directory.
; Use something like "/tmp/xcache" if you want to turn on ReadonlyProtection
; 2 group of php won't share the same /tmp/xcache
; for win32, xcache.mmap_path=anonymous map name, not file path
xcache.mmap_path =    "/dev/zero"


; leave it blank(disabled) or "/tmp/phpcore/"
; make sure it's writable by php (without checking open_basedir)
xcache.coredump_directory =   ""

; per request settings
xcache.cacher =               On
xcache.stat   =               On
xcache.optimizer =           Off

[xcache.coverager]
; per request settings
; enable coverage data collecting for xcache.coveragedump_directory and xcache_coverager_start/stop/get/clean$
xcache.coverager =          Off

; ini only settings
; make sure it's readable (care open_basedir) by coverage viewer script
; requires xcache.coverager=On
xcache.coveragedump_directory = ""
for nginx

Code: 
[xcache-common]
zend_extension = /nginxphp/lib/php/20090626/xcache.so

[xcache.admin]
xcache.admin.enable_auth = On
xcache.admin.user = ""
xcache.admin.pass = ""

[xcache]
xcache.shm_scheme =        "mmap"
xcache.size  =               48M
xcache.count =                2
xcache.slots =                8K
xcache.ttl   =                3600
xcache.gc_interval =          7200

xcache.var_size  =            4M
xcache.var_count =             1
xcache.var_slots =            8K
xcache.var_ttl   =             0
xcache.var_maxttl   =          0
xcache.var_gc_interval =     300

xcache.test =                Off  
; N/A for /dev/zero                   
xcache.readonly_protection = Off
; for *nix, xcache.mmap_path is a file path, not directory.
; Use something like "/tmp/xcache" if you want to turn on ReadonlyProtection
; 2 group of php won't share the same /tmp/xcache
; for win32, xcache.mmap_path=anonymous map name, not file path
xcache.mmap_path =    "/dev/zero"


; leave it blank(disabled) or "/tmp/phpcore/"
; make sure it's writable by php (without checking open_basedir)
xcache.coredump_directory =   ""

; per request settings              
xcache.cacher =               On    
xcache.stat   =               On
xcache.optimizer =           Off

[xcache.coverager]
; per request settings
; enable coverage data collecting for xcache.coveragedump_directory and xcache_coverager_start/stop/get/clean$
xcache.coverager =          Off

; ini only settings                       
; make sure it's readable (care open_basedir) by coverage viewer script      
; requires xcache.coverager=On      
xcache.coveragedump_directory = ""
for apache

Code: 
[xcache-common]
zend_extension = /usr/lib64/20090626/xcache.so

[xcache.admin]
xcache.admin.enable_auth = On
xcache.admin.user = ""
xcache.admin.pass = ""

[xcache]
xcache.shm_scheme =        "mmap"
xcache.size  =               48M
xcache.count =                2
xcache.slots =                8K
xcache.ttl   =                3600
xcache.gc_interval =          7200

xcache.var_size  =            4M
xcache.var_count =             1
xcache.var_slots =            8K
xcache.var_ttl   =             0
xcache.var_maxttl   =          0
xcache.var_gc_interval =     300

xcache.test =                Off
; N/A for /dev/zero
xcache.readonly_protection = Off
; for *nix, xcache.mmap_path is a file path, not directory.
; Use something like "/tmp/xcache" if you want to turn on ReadonlyProtection
; 2 group of php won't share the same /tmp/xcache
; for win32, xcache.mmap_path=anonymous map name, not file path
xcache.mmap_path =    "/dev/zero"


; leave it blank(disabled) or "/tmp/phpcore/"
; make sure it's writable by php (without checking open_basedir)
xcache.coredump_directory =   ""

; per request settings
xcache.cacher =               On
xcache.stat   =               On
xcache.optimizer =           Off

[xcache.coverager]
; per request settings
; enable coverage data collecting for xcache.coveragedump_directory and xcache_coverager_start/stop/get/clean$
xcache.coverager =          Off

; ini only settings
; make sure it's readable (care open_basedir) by coverage viewer script
; requires xcache.coverager=On
xcache.coveragedump_directory = ""


 
D

Doraj1981

New Member
#4
#4
Hello eva2000,

according your experience, what opcode cache works better with LWS? Apc, Xcache or eAccellerator?

Thank you for your informations!
 
You must log in or register to reply here.
Top